980 FAULT SYSTEMLOCATING EQUIPMENT

The new 980 fault-locating system makes it easier than ever to locate ground-faults that you can repair, saving you the prohibitive expense of replacing the entire cable. Designed and manufactured entirely at the company's headquarters in Perry, Oklahoma, the 980 fault system—which replaces but is compatible with the AF2/FT14 system—consists of a 980T locator and fault transmitter, a 980FT fault-only transmitter, and a 980SFP fault probe.

KEY FEATURES

DETAILS

LITERATURE

MANUAL

OFFERS

SPECS

SAFETY

Untitled Document

1 2 3 4 5

KEY FEATURES,

980 FAULT SYSTEM

Locates faults in direct-buried, unshielded power and communications cables at streetlight circuits and meter risers; across driveways, sidewalks, and streets; and even under snow or frozen ground.
The 980 fault system's superior sensitivity helps locate the fault quickly—and to within inches—so you can fix it and move on to the next task.

DETAILS,

980 FAULT SYSTEM

REQUEST MORE INFO

The 980SFP fault probe features a rugged yet lightweight, welded aluminum frame that folds for easy transport.
With just two buttons and an easy-to-read display, the 980SFP is as easy to use as it is to carry.
The 980SFP's remote probe—standard equipment—enables the operator to follow a signal under sidewalks and around trees and other obstacles.
The 980T can transmit signals to both Ditch Witch line locators and Ditch Witch fault locators, so operators can pinpoint the line and then the fault, all with one system.

For simple fault locating, the 980FT fault-only transmitter provides an easy-to-use and affordable solution.
Both the transmitter and detector operate on consumer alkaline batteries.
The Ditch Witch organization supports all of its products with superior-quality parts, service, and training, all available from a worldwide network of dedicated Ditch Witch dealers.

LITERATURE,

980 FAULT SYSTEM

Select your language to view PDF

English

MANUAL,

980 FAULT SYSTEM

SPECIFICATIONS,

980 FAULT SYSTEM

980FT FAULT TRANSMITTER
DIMENSIONS	U.S.	METRIC
Height	11 in	280 mm
Length	14 in	355 mm
Width	4.2 in	107 mm
Weight	7 lb	3.2 kg
BATTERIES
Type: 8 D-cell alkaline
Life (continuous use): Approx. 70 hours
COMPATIBILITY
980SFP, AF2, AF1
OPERATION	U.S.	METRIC
Operating temperature range	-4^° F to 122^° F	-20^° C to 50^° C
Output pulse rate: 1 every 3-4 seconds
Output pulse duration: 200 milliseconds
Fault impedance indicator: 500 ohm to 1 megaohm
Timer: Runs continuously or shuts off after running for selected hour interval (8-hour maximum)

980SFP FAULT DETECTOR
DIMENSIONS	U.S.	METRIC
Height	32.8 in	833 mm
Height from probe base to handle	28.3 in	719 mm
Length	22 in	559 mm
Handle length	10 in	254 mm
Width	2.2 in	56 mm
Weight	5 lb	2.3 kg
BATTERIES
Type: 2 C-cell alkaline
Life (continuous use): 300 hours
COMPATIBILITY
980FT, 980T, FT12, FT14
FEATURES
Automatic gain control: Yes
Digital battery level indicator: Yes
Digital signal strength & direction indicator: Yes
Automatically switching local/remote probe modes: Yes